 |
 |
||||||||||||||||
Features:
Quick Setup 1). The outout of your Li-Poly Compatible charger is connected to the main power leads on the battery. 2). The Li-Poly battery pack is connected to the PB-5 via the Balance Tap Port on the PB-5 through the wiring harness. 3). If you have the Bantam e-Station 501DX, 701 or 902 charger (not required, the PB-5 will work with any Li-Poly Charger) the individual cell voltages can be displayed on the e-Station charger through an optional Link Cable. 4). To start the charge, set the charger as you would normally for the li-poly pack you want to charge and start.
|
Specifications:
|
||||||||||||||||
